full detail

(INTERIOR + EXTERIOR)

Looking to give your car a "factory reset," inside and out?

Selling your car? Make it stand out and increase its resale value.

Special occasion coming up and looking to impress?

Book Now

what’s included?
interior detail

1) Prep

We’ll remove and safely store your personal items and throw away the obvious trash. Car mats removed
2) Vacuum

Using a variety tools and methods depending upon the task we may use our air compressor, drills, and powerful vacuum, to thoroughly remove any loose dirt, dust, and debris from the carpets, seats, and other surfaces.
3) Carpet & Mats

Carpet & mats sprayed with carpet cleaner solution, agitated with drill brush. Special pet hair brush used to collect hair if necessary. Carpet and upholstery extractor used to extract deeply embedded dirt and contaminants.
4) Stain removal

Any noticeable stains or spots will be treated with appropriate cleaning solutions and techniques to minimise or completely remove them.
5) Dashboard and interior Trim cleaning

All hard surfaces such as the dash, console, door panels and other trim will be thoroughly cleaned and conditioned using brushes, pads, steamer and air compressor. We'll deep clean the leather and plastic surfaces using material specific products.
6) seats cleaned

Seats cleaned using a combination of cleaning product, vacuuming, drill brush agitation, steam cleaner, carpet and upholstery extractor used to deep clean dirt and grease.
7) Window and Mirror Cleaning

The detailer will use a streak-free cleaner to ensure that all windows and mirrors are sparkling clean.

exterior detail

1) Wheels

Wheel cleaner/iron decontamination solution applied to wheels. Wheel lugs detailed with gentle hog hair detailing brushes. Long wheel used to agitate wheel barrel and hard to reach areas. All contaminants rinsed off with pressure washer.
2) SNow foam/pre-rinse

All Exterior surfaces undergo pre-rinse, gentle snow foam too break down and loosen contaminants.
3) Hand Wash

Full contact wash using microfibre mitt on all exterior surfaces. Gentle detailing brush used to agitate tight areas such as badges, grill and window seals. Fuel cap and cover brushed and cleaned.
4) Paint Decontamination

At this stage all visible dirt and contaminants are removed from the vehicles surface although there may still be deeply embedded contaminants not visible to the eye. An iron decontamination solution is sprayed generously on all painted surfaces to break down any bonded iron particles. A clay bar or clay mitt is used for micro abrasion to remove remaining contamination.
5) Rinse & Dry

Entire car rinsed and dried either gently with blower or microfibre drying cloths to eliminate water spots.
6) Protectants and coatings

Ceramic Protection spray is applied to all painted surfaces to enhance hydrophobic properties to repel water and to protect from harsh UV rays experienced in the Cairns & FNQ climate. Plastic trim restorer is applied to dark plastic surfaces to restore the faded look and leave a dark trim.
7) Tyres Dressed

Tyres are dressed bringing back look of the dark rubber. This can either be a shiny or matte option depending upon preference.