exterior only

Wheel cleaner/iron decontamination solution applied to wheels. Wheel lugs detailed with gentle hog hair detailing brushes. Long wheel used to agitate wheel barrel and hard to reach areas. All contaminants rinsed off with pressure washer.

All Exterior surfaces undergo pre-rinse, gentle snow foam too break down and loosen contaminants.

Full contact hand wash using microfibre mitt on all exterior surfaces. Gentle detailing brush used to agitate tight areas such as badges, grill and window seals. Fuel cap and cover brushed and cleaned.

At this stage all visible dirt and contaminants are removed from the vehicles surface although there may still be deeply embedded contaminants not visible to the eye. An iron decontamination solution is sprayed generously on all painted surfaces to break down any bonded iron particles. A clay bar or clay mitt is used for micro abrasion to remove remaining contamination.

Entire car rinsed and dried either gently with blower or microfibre drying cloths to eliminate water spots.

Ceramic Protection spray is applied to all painted surfaces to enhance hydrophobic properties to repel water and to protect from harsh UV rays experienced in the Cairns & FNQ climate. Plastic trim restorer is applied to dark plastic surfaces to restore the faded look and leave a dark trim.

Tyres are dressed bringing back look of the dark rubber. This can either be a shiny or matte option depending upon preference.